Send Message

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v

Basic Information
Place of Origin: China
Brand Name: Lensen
Model Number: LS-RAI02
Minimum Order Quantity: 2pcs
Price: Negotiation
Packaging Details: standard carton
Delivery Time: 2-7 days
Payment Terms: T/T, Western Union
Supply Ability: 6000pcs/month
Input: 2AI Type: 4-20mA Or 0-5V
Frequency: 433MHz/868MHz/915MHz Distance: 2km LOS Or More
High Light:

wireless signal transfer

,

remote i o module

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v

 

 

Introduction

LS-RAI02 Modbus RTU is a 1W I/O module, 2 analog inputs, 1 RS485 (wireless RS485 customizes). Wireless control 2km-3km. Use for sensor data wireless collection.

 

Character:

Transparent I/O System

Not need internet, no third party cell, no monthly fees

You have full control over your own carrier

Real time status feedback from the remote site

Fast installation and easy setup

 

General introduction

LS-RAIO Modbus RTU is an industrial controller designed by Lensen Technology. It supports point to point, point to multi-points wireless AI, AO (4-20mA or 0-5V or 0-10V signal) collection and control. This wireless RTU has the advantage of easy installation, no program required, no communication fee. It is reliable and cost-effective substitution for rail signal cable and slip ring signal wire.

 

This series we have 2AI, 2AO, 4AI and 4AO 4 items. Power output we have 2 versions, one is 100mW for 600m LOS control distance, and another one is 1W for 3km LOS control distance. For longer control distance, we also have other higher power output radio modem to configure.

 

Application area

LS-RAIO series are widely used for sensor’s signal wireless collection and meters’ data wireless transmission, kinds of sensors data like liquid level, flow, pressure, weight, temperature, humidity, vibration, distance are applied. So wireless AI, AO modules are widely used in oil, chemical industry, metallurgy, water treatment, environmental protection, air conditioning, medicine and other fields.

 

 

Frequency 433MHz or 450MHz or 470MHz
Power output 1W
Products 2AI
Input type 4-20mA or 0-5V or 0-10V
Output type 4-20mA or 0-5V or 0-10V
Resolution ratio 24 bit
Accuracy ±0.02%
Power supply 9-36V DC usually use 24V DC
Interface RS-485
Channel No. 16ch default, can program via DIP switch
Antenna Sucker antenna with 1.5m cable
Working temperature -35 °C ~ +75 °C industrial
Working humidity 10%-90% relative humidity, no condensation
Dimension 115×90×40(mm)
Fix way Standard 3.5 inch industrial DIN guild rail

 

 

About the DIP switch

1) Outer(right side) DIP 1-4 are used for channel setting. Please check the following definition:

Channel No. DIP Setting Channel No. DIP Setting Channel No. DIP setting Channel No. DIP setting
1

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 0

1234

2

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 1

1234

3

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 2

1234

4

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 3

1234

5

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 4

1234

6

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 5

1234

7

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 6

1234

8

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 7

1234

 

2) Outer(right side) DIP 5-8 are used for mode setting. Please check the following definition

DIP Status Function Remarks
5 OFF With feedback  
ON No feedback mode remote side DI, this side only DO
6,7 OFF,OFF 1 to 1 control

Master set ID to X, Slave module’s ID set to X

(ie. master ID1, slave ID1. remember set ID the same)

6,7 ON,OFF 1 to 2 slaves control

Master set to ID1,

2 slave modules’ ID set to 1 and 2 respectively

6,7 OFF,ON 1 to 4 slaves control

Master set to ID 1,

4 salve modules’ ID set to 1, 2, 3 and 4 respectively

8 OFF Slave mode  
ON Master mode  

 

 

Application diagram

 

1. Point to point control application

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 8

 

2. Point to multipoint application

 

2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 9

 

3. Modbus RS485 wireless communication

 

 2-3km Wireless I O Module 4-20mA Wireless Signal Transmission 2 Channels AI 0-5v 10

Contact Details
Sunny

Phone Number : +8613826574847

WhatsApp : +8613826574847